2024 Ford Maverick Oil Change – A Pro DIY Guide For Longevity

Performing a 2024 ford maverick oil change is a straightforward maintenance task that ensures your compact truck’s engine remains efficient and powerful. This guide provides the exact specifications, tool requirements, and professional steps needed to service both the 2.0L EcoBoost and 2.5L Hybrid powertrains successfully.

You bought your Ford Maverick because it is the ultimate versatile tool for daily commutes and weekend adventures. Keeping that engine running smoothly is the best way to protect your investment and maintain your fuel economy.

Modern engines are built with tight tolerances, making regular maintenance more critical than ever before. This guide will help you master the 2024 ford maverick oil change process, saving you money and giving you peace of mind.

We will walk through the specific tools you need, the nuances between the hybrid and gas models, and how to reset your oil life monitor. Let’s get your Maverick back on the road with fresh synthetic oil and a new filter.

Essential Tools and Materials for the Job

Before you crawl under the truck, you need to gather the right supplies to avoid mid-job hardware store runs. The Maverick uses a mix of metric and Torx fasteners that you must have ready.

For the 2.0L EcoBoost engine, you will need 5.4 quarts of 5W-30 motor oil. If you are driving the 2.5L Hybrid, you will need 5.7 quarts of 0W-20 motor oil to meet Ford’s specifications.

  • 15mm socket and ratchet for the drain plug.
  • T30 Torx driver to remove the aerodynamic splash shield.
  • Oil filter wrench (cap style or adjustable).
  • Drain pan with at least a 7-quart capacity.
  • Funnel and clean shop rags.
  • Replacement oil filter (Motorcraft FL-910S is standard).

Choosing the Right Oil Grade

Ford recommends using a full synthetic or synthetic blend motor oil that meets the WSS-M2C961-A1 (for EcoBoost) or WSS-M2C962-A1 (for Hybrid) standards. Using the correct viscosity ensures proper lubrication during cold starts.

In colder climates, 0W-20 provides better flow for the Hybrid’s frequent engine cycles. For the turbocharged EcoBoost, 5W-30 offers the thermal stability required to protect the turbo bearings under load.

Step-by-Step 2024 ford maverick oil change Guide

Start by running your engine for about five minutes to warm the oil, which helps it drain faster and carry away more contaminants. Park on a level surface and engage the electronic parking brake for safety.

Lift the front of the truck using a floor jack and secure it with jack stands, or drive it onto a set of heavy-duty ramps. Never work under a vehicle supported only by a hydraulic jack.

Removing the Aerodynamic Splash Shield

The most time-consuming part of a 2024 ford maverick oil change is removing the large felt-like undercover. This shield protects the engine bay from debris and improves aerodynamics for better MPG.

Use your T30 Torx bit to remove the numerous screws holding the shield in place. There are also a few plastic push-pins near the wheel wells that may require a flat-head screwdriver to pop loose.

See also Ford Fusion Parking Brake Malfunction – How To Diagnose And Reset

Once the screws are out, slide the shield toward the rear of the truck to unhook it from the front bumper. Set it aside in a clean area so you don’t step on it while working.

Draining the Old Oil

Locate the oil drain plug on the bottom of the oil pan; it faces the rear of the vehicle. Position your drain pan directly underneath and use your 15mm socket to loosen the drain plug.

Unscrew the plug by hand for the last few threads to avoid dropping it into the hot oil. Allow the oil to drain until it slows to a very thin trickle, which usually takes about 10 minutes.

Inspect the drain plug gasket for any cracks or flattening. Wipe the plug clean and reinstall it, tightening it to approximately 20 lb-ft of torque to ensure a leak-free seal.

Replacing the Oil Filter

The oil filter is located on the front side of the engine block on both Maverick models. Position your drain pan under the filter, as some residual oil will spill out when you loosen it.

Use your filter wrench to break it loose, then spin it off by hand. Before installing the new Motorcraft filter, dip your finger in clean oil and lubricate the rubber gasket on top.

Screw the new filter on by hand until the gasket makes contact with the mounting surface. Tighten it an additional three-quarters of a turn; do not over-tighten, as this can damage the seal.

Filling the Engine and Checking for Leaks

Locate the oil fill cap on top of the engine valve cover and remove it. Place your funnel in the opening and pour in the required amount of fresh synthetic motor oil.

Remember that the Hybrid takes slightly more oil than the EcoBoost, so double-check your manual. Replace the fill cap and start the engine, letting it idle for a minute to build oil pressure.

While the engine is running, look underneath the truck to ensure there are no drips from the drain plug or the filter. Turn off the engine and wait a few minutes for the oil to settle.

Verifying the Oil Level

Pull the dipstick, wipe it clean with a rag, and reinsert it fully. Pull it out again to check that the oil level is within the crosshatched “safe” zone on the stick.

If the level is low, add oil in small increments until it reaches the top of the indicated range. It is better to be slightly below the max line than to overfill the crankcase.

Once the level is perfect, reinstall the splash shield by sliding it into the front clips and replacing all T30 screws. Hand-start the screws to avoid cross-threading the clips in the subframe.

Resetting the Oil Life Monitoring System

Your Maverick uses an Intelligent Oil-Life Monitor (IOLM) that calculates oil depletion based on driving habits. After every 2024 ford maverick oil change, you must reset this system manually.

Sit in the driver’s seat and turn the ignition to the “On” position without starting the engine. On the Hybrid, this means the “Ready” light should not be illuminated.

See also 08 Ford Taurus Tire Size – The Ultimate Fitment And Performance Guide

Use the directional pad on the right side of the steering wheel to navigate the menus. Go to “Settings,” then “Vehicle,” and finally select the “Oil Life” sub-menu.

Press and hold the “OK” button until the system displays “Reset Successful” and the percentage returns to 100%. This ensures your truck’s computer accurately tracks your next service interval.

Off-Road and Heavy-Duty Maintenance Considerations

If you use your Maverick for off-roading, towing, or frequent short trips in extreme heat, your service intervals should be shorter. Dust and high operating temperatures break down oil additives faster.

Off-roaders should also take this time to inspect the CV boots and suspension components. Since the splash shield is already off, it is the perfect opportunity to look for hidden damage or fluid leaks.

Check the air filter as well; a clogged filter makes the engine work harder, which can lead to oil shearing. Maintaining a clean intake system is just as vital as clean lubrication.

Frequently Asked Questions About 2024 ford maverick oil change

How often should I change the oil in my 2024 Maverick?

Ford recommends following the Intelligent Oil-Life Monitor, which usually triggers between 7,500 and 10,000 miles. However, for severe driving conditions, many experts recommend a 5,000-mile interval.

Can I use 5W-20 instead of 5W-30 in the EcoBoost?

No, you should stick to the manufacturer’s recommended weight. The 2.0L EcoBoost is designed for 5W-30 to protect the turbocharger components under high-heat scenarios.

Do I need a special tool for the Hybrid oil filter?

The Hybrid uses a standard spin-on filter, but the space is tight. A cap-style wrench that fits onto the end of the filter and attaches to a ratchet is the easiest tool to use.

What happens if I don’t remove the splash shield?

You cannot access the drain plug or filter without removing the shield. Some owners cut “access holes” in the felt, but this can weaken the shield and cause it to sag or flutter at highway speeds.

Is the first oil change different from the rest?

Some owners prefer to do the first 2024 ford maverick oil change at 1,000 or 3,000 miles to remove “break-in” wear metals. While not strictly required by Ford, it is a common practice for long-term owners.

Final Thoughts on Maverick Maintenance

Taking the time to perform a 2024 ford maverick oil change yourself builds a stronger connection with your vehicle. It allows you to spot potential issues before they become expensive repairs.

By using high-quality synthetic oil and following the correct torque specs, you ensure your Maverick stays ready for the trail or the job site. Always dispose of your used oil responsibly at a local recycling center.

Stay safe, keep your tools clean, and enjoy the satisfaction of a job well done. Your Maverick will thank you with years of reliable service and peak performance!

Robert Lozano

Similar Posts